Vehicles
Sections
32 not categorized PORSCHE 914 REPLICACan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1965-69 (includes uncategorized and accessory items) 99919100202 Klein flat blade screw driver for 356c (1964-1965) and 911/912 (1964-1968) models. 914-6 View/Change Diagram
From $86.92
Make a selection FVD1109114840 This replica high butterfly mfi throttle bodies system is for those looking for ultimate engine performance as well as an authentic rsr engine appearance. This kit keeps air consistently on tap for superior drivability. When the throttle is opened, there is an instant injection of air, providing a sharp, crisp throttle response. This efficient injection frees up more power and compliments larger displacements, high lift cams and full exhaust systems. This kit is engineered, precision machined, flow tested and manufactured in Germany. It is replicated to look as close to the original as possible. Intake trumpets (velocity stacks) are available in your choice of red or black. Includes: 6 individual stacks (48 mm ...(choose a part on the right to read more)
$7,456.90
Make a selection FVD361900615EU1
$410.30
Make a selection FVD1109115043 This replica high butterfly mfi throttle bodies system is for those looking for ultimate engine performance as well as an authentic rsr engine appearance. This kit keeps air consistently on tap for superior drivability. When the throttle is opened, there is an instant injection of air, providing a sharp, crisp throttle response. This efficient injection frees up more power and compliments larger displacements, high lift cams and full exhaust systems. This kit is engineered, precision machined, flow tested and manufactured in Germany. It is replicated to look as close to the original as possible. Intake trumpets (velocity stacks) are available in your choice of red or black. Includes: 6 individual stacks (50 mm ...(choose a part on the right to read more)
$7,456.90
Make a selection FVD201911964993 Looking to update your fuel cap? This is a cost effective, sporty, aluminum alternative to the factory cap. It resembles the tequipment cap available on the water-cooled models. It is a quality tuning product manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Oem non-locking, screw type fuel cap sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary ...(choose a part on the right to read more) General FitmentACCESSORY
$136.40
Make a selection FVD1109115043F
$8,948.50
Make a selection FVD1109115040 This replica high butterfly mfi throttle bodies system is for those looking for ultimate engine performance as well as an authentic rsr engine appearance. This kit keeps air consistently on tap for superior drivability. When the throttle is opened, there is an instant injection of air, providing a sharp, crisp throttle response. This efficient injection frees up more power and compliments larger displacements, high lift cams and full exhaust systems. This kit is engineered, precision machined, flow tested and manufactured in Germany. It is replicated to look as close to the original as possible. Intake trumpets (velocity stacks) are available in your choice of red or black. Includes: 6 individual stacks (50 mm ...(choose a part on the right to read more)
$7,456.90
Make a selection FVD361900615EU
$410.30
Make a selection FVD361900715EU This fuchs replica is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished black with a layer of clear coat. TUV approval documentation is standard with each wheel. The wheel accepts factory Porsche wheel bolts and center caps. Center caps sold separately, part # 190361035 or 190361033 sold individually.
$410.30
Make a selection FVD361900716EU Wheels accept the original 3-prong center cap - clear coated - original offsets - accepts original 3-prong center cap - lightweight aluminum if necessary please order center cap (190 361 033) separately.
$408.10
Make a selection FVD361900815EU This fuchs replica is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished black with a layer of clear coat. TUV approval documentation is standard with each wheel. The wheel accepts factory Porsche wheel bolts and center caps. Center caps sold separately, part # 190361035 or 190361033 sold individually.
$476.30
Make a selection FVD361900916EU Wheels accept the original 3-prong center cap - clear coated - original offsets - accepts original 3-prong center cap - lightweight aluminum if necessary please order center cap (190 361 033) separately.
$431.20
Make a selection FVD361900915EU This fuchs replica is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished black with a layer of clear coat. TUV approval documentation is standard with each wheel. The wheel accepts factory Porsche wheel bolts and center caps. Center caps sold separately, part # 190361035 or 190361033 sold individually.
$575.30
Make a selection FVD361900615EU2
$455.40
Make a selection ER2071600 Elephant racing low-friction control arm mounts allow for free control arm movement, eliminating any potential for binding. Elephant racing corrected a key factory design limitation:our mounts self-align in all axis, becoming collinear to avoid binding as the arm moves through its range of motion. The low-friction control arm mounts self-align in both the horizontal and vertical planes. The result is collinear front and rear mounts delivering smooth non-binding action. You get superior performance and a smoother ride. Kit includes everything required to upgrade one car. Factory rear mounts are replaced with our self-aligning mounts. Factory front mounts are retained and augmented with self-aligning washers. ...(choose a part on the right to read more) General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76 912 1965-69
$225.00
Make a selection 90013700102 Exact replica of the original klein tool for the early 911 912 356c and 914-6 View/Change Diagram
From $63.60
Make a selection ST5201 The lemans is a classic, handmade, custom seat with a firm support. It comes in leatherette with basket weave. The configurations were used in the recaro sport seat and the Porsche seat and the classic choice for the classic seats. The lemans is currently our lightest seat and is used as a vintage race seat as a bolt in replacement and upgrade for the Porsche 914. Some customers have had the seat installed in the Porsche 904 replicas. Sliders, as well as matching headrests, are standard on all seats. seats sold separately as well as seat brackets for specific cars. General Fitment914 1970-76911 1970-73 911 1965-69 912 1965-69 356 1960-65 356 1950-59
$1,423.50
Make a selection RSRFSBA19 Building a vintage racer? this is the perfect swaybar for your replica 911rsr, rs, st, or any vintage racer. they are the perfect combination of a vintage rsr looking design, combined with all the proven modern technology of our standard 911 swaybars. the arms are copies of the real rsr arms, but redesigned to fit onto our light weight hollow 4130 chrome moly swaybar. we've even managed to design in additional adjustability over the origional rsr design. the front and rear drop links are also similar looking to the real rsr design, except with larger and more robust teflon lined rod ends. all the aluminum parts are made from 6061-t6 aluminum, and are hard anodized gray in color, for corrosion resistance ...(choose a part on the right to read more) General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$675.00
Make a selection ST5202 The lemans is a classic, handmade, custom seat with a firm support. It comes in leatherette with basket weave. The configurations were used in the recaro sport seat and the Porsche seat and the classic choice for the classic seats. The lemans is currently our lightest seat and is used as a vintage race seat as a bolt in replacement and upgrade for the Porsche 914. Some customers have had the seat installed in the Porsche 904 replicas. Sliders, as well as matching headrests, are standard on all seats. seats sold separately as well as seat brackets for specific cars. General Fitment914 1970-76911 1970-73 911 1965-69 912 1965-69 356 1960-65 356 1950-59
$1,100.00
Make a selection 9727 5x130 fuchs replica windmill alloy wheel for your Porsche. General Fitment911 1965-69911 1970-73 914 1970-76 912 1965-69 356 1960-65
$226.00
Make a selection 91136101690 Fits 1965-89 911 and turbo. Available in 5.5x14, 5.5x15, 6x15, 7x15, 8x15, 9x15. Also 6x16, 7x16, 8x16, 9x16. The replica is the 7.5 and 9 sizes. Available in black with silver, black with black or grey with silver. View/Change Diagram
From $322.00
Make a selection F01P If you haven’t already replaced those rotted or cracked floorboards in your 911, you need to. Don’t waste your money on another set of wood floorboards that will just rot like your old ones, or plastic ones that will crack with time. We now offer aircraft grade aluminum floor boards that will last forever. These floorboards are very light weight and install in minutes. They’re exact replicas of the original floorboards without the need to ever replace them. These floor boards are a great match with the rennline pedal covers and add a race car flare to your Porsche. Silver in color. General Fitment911 1965-69911 1970-73 912 1965-69
$140.95
Make a selection 129PR101815 The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved. Sold individually.
$1,197.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |